PA66(尼龍66)AM40XH2.0/德國朗盛/物性表參數

日期：2020-04-25 02:38:41 編輯：科思德塑膠來源：科思德塑膠瀏覽：265

德國朗盛 Durethan PA66 AM40XH2.0是一種加40%玻璃纖維/礦物，注塑成型，熱老化穩定，不易變形尼龍樹脂,根據特定的材料及所需等級，尼龍從環境中吸收潮氣的能力也不同。這與增塑劑的效果相同，即可以提高材料的斷裂伸長及韌性，但降低了材料的強度和剛度,除了自然色及黑色外，還可以提供一係列的不透明標準顏色；如有需要，也可以提供特定顏色的產品。
生產商：LANXESS(德國朗盛)、品名：Durethan
PA66(尼龍66)AM40XH2.0/德國朗盛/物性表參數
以下是德國朗盛Durethan PA66 AM40XH2.0物性表參數

C	These property characteristics are taken from the CAMPUS plastics data bank and are based on the international catalogue of basic data for plastics according to ISO 10350.

Property		Test Condition	Unit	Standard	guide value
					d.a.m.	cond.
Rheological properties
C	Molding shrinkage, parallel	60x60x2; 290 °C / MT 80 °C; 600 bar	%	ISO 294-4	0.45
C	Molding shrinkage, transverse	60x60x2; 290 °C / MT 80 °C; 600 bar	%	ISO 294-4	1.00
	Post- shrinkage, parallel	60x60x2; 120 °C; 4 h	%	ISO 294-4	0.05
	Post- shrinkage, transverse	60x60x2; 120 °C; 4 h	%	ISO 294-4	0.10
Mechanical properties (23 °C/50 % r. h.)
C	Tensile modulus	1 mm/min	MPa	ISO 527-1,-2	10600	6500
C	Tensile Stress at break	5 mm/min	MPa	ISO 527-1,-2	150	85
C	Tensile Strain at break	5 mm/min	%	ISO 527-1,-2	2.7	5.5
C	Charpy impact strength	23 °C	kJ/m²	ISO 179-1eU	55	60
C	Charpy impact strength	-30 °C	kJ/m²	ISO 179-1eU	50	45
C	Charpy notched impact strength	23 °C	kJ/m²	ISO 179-1eA	<10	<10
C	Charpy notched impact strength	-30 °C	kJ/m²	ISO 179-1eA	<10	<10
	Izod impact strength	23 °C	kJ/m²	ISO 180-1U	50	55
	Izod impact strength	-30 °C	kJ/m²	ISO 180-1U	45	45
	Izod notched impact strength	23 °C	kJ/m²	ISO 180-1A	<10	<10
	Izod notched impact strength	-30 °C	kJ/m²	ISO 180-1A	10	<10
	Flexural modulus	2 mm/min	MPa	ISO 178-A	9700	6000
	Flexural strength	2 mm/min	MPa	ISO 178-A	240	150
	Flexural strain at flexural strength	2 mm/min	%	ISO 178-A	3	5
	Flexural stress at 3.5 % strain	2 mm/min	MPa	ISO 178-A		140
Thermal properties
C	Melting temperature	10 °C/min	°C	ISO 11357-1,-3	260
C	Temperature of deflection under load	1.80 MPa	°C	ISO 75-1,-2	230
C	Temperature of deflection under load	0.45 MPa	°C	ISO 75-1,-2	250
Other properties (23 °C)
C	Density		kg/m³	ISO 1183	1460
Processing conditions for test specimens
C	Injection molding-Melt temperature		°C	ISO 294	290
C	Injection molding-Mold temperature		°C	ISO 294	80
Processing recommendations
	Drying temperature dry air dryer		°C	-	80
	Drying time dry air dryer		h	-	2-6
	Residual moisture content		%	Acc. to Karl Fischer	0.03-0.12
	Melt temperature (Tmin - Tmax)		°C	-	280-300
	Mold temperature		°C	-	80-120

溫馨提示：
本物性表參數提供者不承擔任何法律責任，建議在選擇材料前，就數據值與塑膠材料廠商進行驗證。版權歸原作者所有，如有侵權請立即與我們聯係.

上一頁：PA66(尼龍66)AKV60XF/德國朗盛/物性表參數下一頁：PA66(尼龍66)AM430H2.0/德國朗盛/物性表參數

返回首頁返回物性參數列表

PA66(尼龍66)AM40XH2.0/德國朗盛/物性表參數

熱門文章

推薦文章